Stopping damp and mould on board in winter

Owners rarely come back to a broken boat after a Boka winter. They come back to a damp one: musty cushions, black spots on headlinings and mould in lockers. Humid jugo weather, cool nights and a closed-up cabin are all it takes. The good news is that damp is easy to prevent.

Key points

  • Mould needs moisture and still air: remove one and it struggles.
  • Take soft furnishings home or stand them on edge, and prop open lockers, drawers and the fridge.
  • With shore power, a dehumidifier makes the biggest difference. Desiccant types work better than compressor types in cool cabins.
  • Find and fix leaks: one dripping hatch can keep a whole cabin damp.
  • Clean mould early with a mild cleaner; do not mix cleaning chemicals.

Why boats get damp

Warm, humid air meets a cold hull and condenses. In winter a boat goes through that cycle every day and night. Add rain water through a leaking hatch and a closed cabin with no air moving, and mould follows within weeks.

Ventilate

  • Fit passive vents or leave vents open. Make sure they cannot let rain in.
  • Prop open lockers, drawers, wardrobes, the fridge and the oven.
  • Lift floorboards a little if the bilge is dry, so air reaches it.
  • Stand mattresses and cushions on edge, or better, take them home or ashore.

Dehumidify

If the boat has shore power, a dehumidifier is the single most effective step. Desiccant dehumidifiers keep working well at the cooler temperatures of a winter cabin, while compressor types lose efficiency as it gets colder. Set it to drain into the sink or galley drain so it does not need emptying, and make sure it is safely secured and on a protected circuit. Without power, moisture traps help a little in small spaces, but they need checking and emptying.

Find the leaks

Look for water stains under hatches, portholes, deck fittings, the mast step and chainplates. After heavy rain, check those spots and the bilge. Re-bedding a leaking fitting is a small job compared with replacing a stained headlining.

Cleaning mould

  1. Ventilate and protect yourself with gloves and a mask in enclosed spaces.
  2. Clean hard surfaces with a mild solution, such as diluted white vinegar or a cleaner made for mould on boats. Test on a hidden spot first, especially on wood and fabric.
  3. Dry thoroughly afterwards, otherwise it comes back.
  4. Treat fabrics separately. Some can be washed, others need a specialist cleaner.
Never mix bleach with other cleaners, especially ammonia or acidic products. The fumes are dangerous in a closed cabin.
Viber WhatsApp